Adjusting segment overlaps

ComplexFill00155.png 

Use Traditional Digitizing > Complex Fill to digitize filled shapes with a single stitch angle. Right-click for settings.

FusionFill00156.png 

Use Traditional Digitizing > Complex Turning to digitize filled shapes with turning stitch angles. Right-click for settings.

Free shapes generally stitch out in several segments, joined by travel runs. Where segments within an object meet, the push-pull effect on the fabric during stitching may cause gaps to appear. These gaps can be prevented by adding overlapping rows.

To adjust segment overlaps

input00157.png

 

input00160.png

 

TaperAngle.png